H&L

Hope & Light Particle Filtering Half Mask ( YL018 FFP2 NR EN149:2001+A1:2009)

Easy to Use

• Unfold the mask.
• Position the mask under the chin covering mouth and nose.
• Adjust the ear loop to make it comfortable
• Press soft nosepiece to conform snugly around the nose.
• To check fit, both hands over the mask and exhale vigorously. lf air flows around nose.

tighten the nosepiece. If air leaks around the edge. reposition the hamess for better fit. Re-check the seal and repeat the procedure until the mask is sealed properly.

Storage condition

Keep away from direct sunlight. dust,contaminated areas,extreme temperatures,excessive moisture and dangerous chemicals.

Storage Temperature Range:-30'C to +70°C

Storage Maximum Relative Humidity: <80%

Please read this User Information Sheet carefully before using this product. This product complies with the requirements of EU Regulation (EU) 2016/425 for Personal Protective Equipment and meets there quirements of European standard EN149:2001+A1:2009.

Check before use

• The mask must be selected properly for intended application.
• An individual risk assessment must be evaluated.
• Check the mask that it is undamaged with no visible defects.
• Check that the expiry date has not been reached (see the packaging).
• Check the protection class (FFP1 NR/ FFP2NR/ FFP3 NR) is appropriate orthe product used and its concentration.
• Do not use the mask if a defect is present or the expiry date has been exceeded.
• This product is designed to protective against the risks:
• These devices are designed to protect against both solid and liquid aerosols.